Toggle::height used to adjust only the row: the resolved value was floored at the theme track height and the pill kept its theme size, so a toggle capped below the fluid row height still rendered a full-size pill — on large surfaces, visibly out of scale next to controls that honour their cap. The floor is gone; when the resolved height falls below the theme row height, track and thumb now scale down proportionally (never up — the factor is capped at 1), and preferred_size reports the scaled track width so layout, focus ring and centring stay consistent. A toggle without an explicit height is untouched.
elide compared measure( text ) <= max_w strictly, which breaks when the caller sized itself from the same measurement: a button reports text + 2×pad as its preferred width, the layout grants exactly that, and draw hands elide back rect.width − 2×pad. In f32 the add-then-subtract round-trip can land a few ULP under the original measurement, the strict comparison fails, and the truncation branch then costs the full width of the ellipsis — a sub-pixel deficit turned "Empezar" into "Empez...". The fit check now allows half a pixel of slack, which absorbs any mismatch of this class while leaving genuine overflows to truncate as before.
Row deficit distribution (layout/row.rs). `Row` knew how to hand out leftover width but had no notion of a shortfall: `leftover` was floored at zero and every child was laid out at its preferred width, so a cluster wider than its rect simply overflowed — and symmetrically, because the no-spacer branch centres the block, which is why both end labels of a segmented control were clipped at once rather than only the trailing one. The shortfall now comes off the widest children first, by water filling: `width_cap` sorts the flexible widths and returns the largest per-child cap `c` for which `sum( min( w, c ) ) <= available`, so a long title absorbs the whole deficit while an icon button beside it keeps its size, and equal siblings — a segmented control — share it evenly. A uniform scale-down, which was the first attempt, was wrong precisely there: it thinned a header's back arrow along with the title it sat next to. Spacers and flex children stay out of the flexible set, so a pinned gap keeps the width it was given — an explicit spacer is a decision, not slack — and `Row::no_shrink()` opts a row out entirely, for strips deliberately wider than their viewport such as a carousel rail meant to be scrolled. `align_right` and the centring branch now measure the laid width rather than the preferred one, so a shrunken row is positioned against what it actually occupies.
Button label elision (widget/button/mod.rs, widget/mod.rs, widget/list_item/mod.rs). Shrinking a row is only half the fix: a leaf handed less width than it asked for still painted its full string, so the deficit came out clipped instead of truncated. `draw_text_button` now elides the label against the rect the layout granted, less the horizontal padding, for all three variants. The truncation rule moves out of `ListItem`, where it was a private helper, into a single crate-internal `widget::elide` the two share. `Text` keeps its own inline copy for now: it measures through an optional font override that this signature does not carry, and folding the two together is a separate change.
icon_size as a Length (widget/button/mod.rs). `Button::icon_size` was the one geometry setter that ignored the widget-scaling mode — it took a bare `f32`, pinned it, and used `0.0` as the "unset" sentinel. It now takes `impl Into<Length>` behind an `Option` and resolves through `Canvas::resolve_geom`, the way `height`, `width` and `font_size` already do. A bare number still means `Length::px`, so every existing call keeps its exact size; what it adds is `Length::widget( n )`, which follows the active mode the way stock icons do. Without it a back arrow pinned at 21 px sat next to a `list_item` chevron that fluid sizing had grown well past 21, and read as visibly smaller on the same row.
Add the primitives rustdroid needs to project an Android view hierarchy onto an ltk surface, all kept general rather than Android-specific.
Canvas gains arbitrary vector path fill and stroke: `Canvas::fill_path` / `stroke_path` over a new `PathCmd` command list (MoveTo/LineTo/QuadTo/CubicTo/Close in surface coordinates). The software backend rasterises directly with tiny-skia; the GLES backend rasterises into a tiny-skia pixmap and blits it (CPU fallback, no GPU path shader). This is what renders an Android `Path`, a `VectorDrawable`, or a Lottie frame.
`ExternalSource::Cpu` (and the `External::cpu` constructor) adds an immediate-mode CPU drawing closure, invoked once per frame with the canvas and the widget's laid-out rect, working on both the GLES and software backends. It hosts a custom `View.onDraw` straight onto the ltk canvas without a GL texture round-trip, unlike the existing `Texture` source which only renders on GLES.
`Stack::push_placed` appends a child at an exact rect, bypassing alignment and intrinsic sizing. This lets a view tree whose geometry is computed elsewhere — Android's measure/layout pass, which yields an absolute rect per view — be projected onto a Stack in paint order.
New `RichText` widget: wrapped paragraph text carrying a message per clickable link range, with the layout pass emitting one hit rect per link line so taps land on the link rather than the whole paragraph. It is the ltk side of an Android `Spanned` carrying `URLSpan` / `ClickableSpan`.
gesture: only drive the horizontal pager once the axis locks horizontal
`on_move` emitted horizontal swipe progress whenever `swipe_axis != Vertical`, which includes the pre-lock window where `swipe_axis` is still `None` (the first ~8 px of travel). But `horizontal_drag_started` only flips once `dx.abs() > 8`. A vertical gesture that opened with a few pixels of lateral drift — a swipe-up to the launcher, a scroll — therefore emitted a tiny horizontal progress sample, which armed the consumer's pager, then locked vertical without `dx` ever passing 8, so `horizontal_drag_started` stayed false. On release the horizontal branch was skipped, no `on_swipe_horizontal_progress(0.0)` fired, and the pager stayed stuck active — on the crustace homescreen that froze the surface (the main stays motion-only behind stale page subsurfaces) until an unrelated gesture reset it.
Emit horizontal progress only once `swipe_axis == Some(Horizontal)`. Locking onto the horizontal axis already implies `dx.abs() > 8`, so `horizontal_drag_started` is set in the same step, restoring the invariant that a frame which drives the pager always has a matching release event to settle it. The cost is that the first ~8 px of a horizontal drag no longer move the page, which is the same deadband the axis lock already imposes on the vertical panels. Adds `pre_lock_lateral_drift_does_not_drive_horizontal_pager`.
Forge's app switcher needs two layouts the existing widget set didn't cover. The desktop grid wants a partial last row centred under the rows above (3 tiles → row 1: two, row 2: one centred) so a 7-of-9 leftover band reads balanced rather than left-aligned. The mobile variant wants a horizontal carousel where the focused tile sits centred in the viewport at a configurable fraction of its width and its neighbours peek out on the sides at a fixed gap.
Extend `WrapGrid` with `centre_last_row( bool )`. When set, layout offsets a row that has fewer than `columns` children by `(missing * (cell_w + spacing)) / 2` so it stays centred inside the content rect. Defaults to false; every existing call site continues to land tiles flush-left. Covered by three layout tests (centred partial row, full row no-op, off-by-default).
Add the `Carousel` widget at `src/widget/carousel/`. It is a pure layout primitive: `focused_width_frac` (0.05–1.0, clamped), `gap` and `offset` are owned by the caller, leaving drag / inertia / snap policy to the host so the compositor can plug in its existing touch pipeline. Each child gets a rect at `base_x + idx * (child_w + gap)` and the full viewport height; `snap_offset( viewport_w, idx )` translates index to centring offset and `focused_index( viewport_w )` rounds the current offset back to the nearest tile. Plumbed into `Element::Carousel` with the matching arms in `widget/element.rs` and walker in `draw/layout.rs`; re-exported as `ltk::{ Carousel, carousel }`. Covered by nine unit tests (layout, offset shift, snap / focus round-trip, frac clamp, child height) plus a `cargo run --example carousel` demo with Prev / Next / arrow-key navigation against an external offset state. The example is wired into the `examples` Makefile target.
Updates the widget catalogue and the `widget/mod.rs` landing comment to list the carousel under "Clipping wrappers" and to mention `centre_last_row` in the grid section.
Each source file that had grown beyond a single concern is replaced by an identically-named directory containing focused submodules. `src/event_loop/mod.rs` (878 lines) becomes a directory with clipboard, context_menu, cursor_shape, drag, focus, handlers, invalidation, overlays_reconcile, repeat, run, surface, text_editing, and tooltip. Every widget, input handler, and theme component follows the same split. Public interfaces are unchanged — only the internal file layout moves.
image bumped from 0.25.2 to 0.25.9.
`Button::tooltip( text )` registers a hint string that fires after a 600 ms pointer dwell. `LaidOutWidget` gains a `tooltip: Option<String>` field, `Element::tooltip()` exposes it to the input layer, and the existing pointer-hover path now calls `arm_tooltip` on hover-enter and `cancel_tooltip` on hover-leave / touch. The deadline is polled alongside `next_long_press_wakeup` in `try_run` so an idle pointer still gets a wake-up at the firing instant; on fire, `tooltip_overlay()` synthesises an `OverlaySpec` — a rounded `text_primary @ 95%` pill drawn with `bg` text — anchored above the hovered widget, flipping below or clamping inside the screen if it would clip, and pushed alongside the app's own overlays both in the redraw path and in `reconcile_overlays` so the layer surface is created the same frame the tooltip becomes visible. Pointer-only by design: touch events explicitly cancel because a tap-and-release should never linger into a hint. The `showcase` example wires `.tooltip(..)` on the three button variants as a smoke test.
The drag pipeline now reports positions in main-surface (global) coordinates instead of per-surface. `surface_offset_for( focus )` derives the top-left of an overlay surface from `SurfaceState::layer_anchor` — newly stored at `reconcile_overlays` time from `OverlaySpec::anchor` — combined with the main surface's dimensions; `on_drag_move`, `on_drop`, the synthetic move emitted on drag-promotion in `pointer.rs`, and the `pending_drag_inits` push site in `gesture::start_drag` all translate before handing coordinates to the app. The motion and release paths additionally `request_redraw()` every overlay so a dock-style drop target painted on an `Anchor::Bottom` layer surface gets repainted as the drag moves — without that, the visible drop indicator only updates when the cursor re-enters the main surface. Drops still target whichever surface fired the release; only the coordinates are unified.
`ForeignToplevelListHandler` previously read `app_id` directly via `ForeignToplevelList::info()`. Clients that never set `app_id` (some winit-windowed compositors, simple test clients) were silently invisible to crustace-style docks because the empty string fell through `unwrap_or_default()` and the dock then keyed entries off `""`. `toplevel_display_id()` cascades: prefer `app_id` for desktop-entry matching, fall back to `title` for human-readable identification, and finally to the protocol-issued `identifier` which is always present and unique per handle. Applied to both `new_toplevel` and `update_toplevel`.
`theme::system_fontdb()` lazily loads the system font database once via `OnceLock` and reuses the `Arc` for every `decode_svg_bytes` call. resvg's default `Options::fontdb` is empty, so any SVG containing `<text>` rendered with the built-in fallback font or no font at all; with the system DB attached, icons and decorative SVGs with embedded labels now resolve glyphs correctly. Cached because `load_system_fonts()` walks every font path on the system and is comfortably tens of milliseconds on a cold cache — not something to repeat per icon decode.
`themes/default/theme.json` tweaks one variant's slot palette: `surface-alt` from `@indigo/D9` to `@white/D9` and `text-primary` from `@white` to `@navy`, plus a cosmetic re-alignment of the `"value"` columns in the same slots block.
